
Breaking the limits for large diameters and extreme thicknesses.
TECHNOLOGIES
When dimensions and thicknesses exceed standard laser capabilities, STL steps in with cutting-edge HD plasma and oxy-fuel pipe cutting technologies.
We are among the very few global service centers capable of handling heavy mechanical processing on oversized tubes. We deliver fast, highly accurate solutions that are fully prepared for heavy-duty welding and onsite assembly.
1
LARGE DIAMETER PIPE CUTTING:
Flawless processing of diameters up to 2.5 meters (2,500 mm).
2
EXTREME THICKNESSES, NO COMPROMISES:
HD Plasma cutting up to 130 mm and oxy-fuel up to 200 mm.
3
LARGE TUBE BEVELING:
Deep edge preparation with 3D cuts up to +/- 70°.
Tube plasma cutting features
1.Versatile
Plasma cuts any electrically conductive material, enabling us to cut an extensive range of materials from mild steel to premium alloys.
2.Fast
When dealing with wall thicknesses up to 25 mm, plasma cutting outperforms oxy-fuel cutting.
The exothermic process associated with oxy-fuel cutting limits cutting speed to between 350 and 800 mm/min, while plasma cutting can be as fast as 3000 mm/min when handling thinner tubes.
Since there is no need to preheat the material in the plasma cutting process, this saves even more time on each individual cut.
2.High Quality
Plasma cutting offers a better surface result than its oxy-fuel counterpart when cutting thinner materials.
With plasma, the heat-affected zone is also smaller, meaning less distortion of the material’s internal molecular microstructure.
When heavy engineering challenges demand exceptional material thickness, our oxy-fuel pipe profiling department is the most reliable and cost-effective answer.
Our oxy-fuel systems push past conventional limits, allowing us to cut large diameter carbon steel pipes with thicknesses up to 200 mm. Thanks to specialized torches that generate a long, consistent flame core, we ensure clean, precise cuts even on the most massive and complex profiles.
The decisive advantage for heavy steelwork:
Beveling is critical in heavy structural carpentry. With our oxy-fuel systems, we take edge preparation to the extreme, performing steep bevels up to +/- 70°. This means supplying you with heavy structural components that drastically slash manual preparation times in your workshop
ROUND TUBE
SQUARE TUBE
RECTANGULAR TUBE
MINIMUM DIAMETER
12mm
MAXIMUM DIAMETER
2500mm
MAXIMUM THICKNESS
200mm
MAXIMUM LENGTH
16000 metri
3D CUTTING UP TO
+/- 45 °

CARBON STEEL
High Definition (HD) plasma cutting is the premium solution for processing thick-walled carbon steel, stainless steel, and aluminum pipes.
Our systems slice through thicknesses up to 120 mm (carbon steel) and 130 mm (stainless steel). By utilizing specific technical gas mixtures (Argon, Hydrogen, Nitrogen), we guarantee superior cutting quality, minimizing the Heat-Affected Zone (HAZ) and preserving the material’s internal microstructure.
Why choose STL’s Plasma Services:
– Ideal for outdoor storage materials:
Performs flawlessly even on large-format pipes suffering from mill scale, oxidation, or poor surface quality due to weather exposure.
– Integrated tracing & marking:
We perform surface marking and layout tracing directly on the machine. This dramatically simplifies the assembly process for your welders and fitters on site.
– 3D Beveling (Weld Preparation):
We execute highly accurate bevels up to +/- 45°, delivering pipes with edges strictly ready-to-weld for structural applications.
ROUND TUBE
SQUARE TUBE
RECTANGULAR TUBE
MINIMUM DIAMETER
100mm
MAXIMUM DIAMETER
2500mm
MAXIMUM THICKNESS
130mm
MAXIMUM LENGTH
16000mm
3D CUT UP TO
+/- 45 °

STAINLESS STEEL

STEEL DUPLEX

CARBON STEEL

ALUMINUM
Oxy-fuel/Plasma
Scroll to view our Oxy-fuel and Plasma processing on large formats